AVA · Features
Everything AVA does
The ERP built for vending machine operators, feature by feature. From the field to the office, all your machines in one tool.
AVA is three connected tools
- The office
Online back office
In the browser, nothing to install: planning, checks, stock, invoicing and reporting.
- The field
Mobile app
For refillers and technicians in the field, even with no network.
- The cash
Counting app
To count the cash, matched to the visit, even offline.
Available inFrançaisEnglishDeutsch
- 52,562points of sale managed
- 445,872,419sales collected by telemetry
- 5,175,755refill and service visits
- 576,958customer calls handled
AVA counters, read live.
Spec sheet
Every AVA feature, area by area.
Planning and routes
Fewer visits, at the right time.
- Dynamic visits
- Visits created from each machine’s needs, with their reason.
- Suggested and mandatory thresholds
- Two levels to separate what can wait from what can’t.
- Measured planning quality
- Every visit rated too early, on time or too late.
- Service level simulation
- The effect of a planning rule, and the estimated savings, before you apply it.
- Skipped and reassigned visits
- A visit can be skipped (and come back), archived or handed to another operator.
- Substitutes and leave
- An absent operator’s visits go to their substitute, set per point of sale.
- Working time and absences
- Operator unavailability and actual working time.
- Alerts
- No sales, visit, sales capacity, ticket, supporting document; warning or critical.
Field and mobile
The tool for route drivers and technicians.
- Synchronised mobile app
- What is done in the field reaches the office on its own. At worst, with no signal, work goes on: everything syncs when the signal returns.
- Product movements
- Loaded, removed, expired: every product going into or out of the machine is recorded during the visit, and stock follows.
- NFC identification
- Tapping the point of sale starts the visit. Tags for route drivers, vehicles, bags, cash floats, trolleys and warehouse locations.
- EVA-DTS audit readings
- Audit of every machine during the visit, with the Hydra key or remotely.
- Cash floats
- Change reserve entrusted to the route driver, identified by NFC or barcode.
- Photos and supporting documents
- Taken during the visit, sent at sync.
Sales and telemetry
Your devices, your sales, in AVA.





- Symotronic
- Telemetry connectors
- Every transaction becomes an AVA sale, linked to the right point of sale.
- Remote audits
- Audit retrieved without a site visit, depending on the device (Coges, Nayax).
- Sales to assign
- A device not yet linked to a point of sale? Its sales are not lost: they wait in “To process”, then join the right point of sale as soon as it is linked.
- Revenue
- The revenue of your fleet and your deliveries, over the period and scope of your choice.
Pricing
Set at the office, applied on the machine.
- Prices in force in the field
- The prices actually applied in each vending machine, compared with the requested prices.
- Remote price updates
- On Nayax machines, from AVA: preview before sending, status until applied.
- Price updates with the Hydra key
- On other machines, the route driver sends the new prices to the coin mechanism during the visit, with the Hydra key.
Stock and logistics
Every product tracked, from warehouse to machine.
- Real-time theoretical stock
- The stock of each vending machine, continuously: every sale reported by telemetry deducts from it, every refill tops it up.
- Stock
- Warehouses, vehicles and points of sale; every movement tied to an activity.
- Stock counts
- Full or partial, on mobile, compared with known stock.
- Automatic refill orders
- For the vending machine as for the vehicle, AVA works out the refill order: what should be there, minus known stock.
- Warehouses
- Goods receipt, storage locations, depot stock counts.
- Product orders
- Creation, tracking, receipt and invoicing of orders.
- Customer deliveries
- Prepared, loaded, delivered to the customer site.
Data control
Every visit checked.
- Visit review
- Blocking and non-blocking rules; only the visits to review are left to process.
- Non-compliant actions
- Actions expected during a visit and missing are flagged.
- Financial audits
- Meter readings, variances and reconciliations.
Cash management
Every euro accounted for.
- Cash counting
- Dedicated counting app, with offline mode; manual or automatic reconciliation.
- Cash variances
- Counted minus expected, the expected amount coming from the visit audit.
Invoicing
From visit to invoice, without re-keying.
- Generated invoices and commissions
- All the invoices and commissions for the period in one go, from visits and per contract, validated automatically if you wish.
- Automatic e-invoicing
- Submission to the accredited platform, retry on failure, official statuses tracked: it all happens on its own. Factur-X (EN 16931), France and Luxembourg, issuing.
- Credit notes
- Issued and sent like invoices.
- Accounting exports
- To your accounting software.
Fleet management
Every machine known, serviced, repaired.
Equipment
- Equipment and machines
- Every machine and what comes with it, by point of sale.
- Spare parts
- Catalogue, stock, prices and replacement.
- Equipment replacement
- Swap a machine or peripheral from the mobile app.
Tickets and maintenance
- Tickets
- A customer call tracked until resolved, even offline.
- Corrective maintenance
- Interventions logged in the field, available at the office.
- Preventive maintenance
- Scheduled recurring servicing: filter replacement, descaling, overhaul.
Management and data
Your figures, yours to keep.
- Control centre
- Routes, control, cash, tickets, goods and losses, fleet health, audits, SMS.
- Dedicated data warehouse
- Your data in your own BigQuery warehouse, open to Power BI and Looker Studio.
- Reports and exports
- Customisable reports and file exports.
Customers and points of sale
Your organisation, in AVA.
- Customers
- Your customers, their contracts and their terms.
- Sites
- Each customer’s sites, where your points of sale are installed.
- Point of sale management
- Each point of sale with its equipment, its schedule and its staff.
- Customer contacts
- Each customer’s contacts, notified when a ticket is opened and closed if they wish.
Users and permissions
Everyone sees what concerns them.
- Permission management
- Each person only accesses the screens and actions that concern them.
- Permission groups
- A role’s permissions grouped once: route driver, technician, back office.
- Assignments
- Each team member linked to their points of sale.
- End-of-day summary
- The operator reviews their day on the mobile app and validates it before closing it.
- Lead and substitute
- A dedicated lead per point of sale, and a substitute who takes over during their leave.
Integrations and support
With what you already have, and with us.
- Data export
- To your invoicing, BI and accounting software…
- Email templates
- The text sent with each invoice, credit note or commission statement.
- SMS
- Messages tracked from the control centre.
- Mobile notifications
- An assigned ticket arrives straight away on the technician’s phone.
- AVA assistant
- Access to AVA’s documentation, not to your data: the assistant reads no data from your fleet. Its documentation is generated from the application’s code and kept up to date with every release.
- The AVA team at your side
- Hotline, video training, onboarding support, follow-up.
Catalogue · for AVA customers
AVA hardware
Selected and set up for the AVA mobile app, in the field.
HYDRA
Hydra Box
The audit key designed by Darwin IO. It goes with the route driver to read audits and change prices.
- Ports
- IrDA, RS232, RJ45
- Link
- Bluetooth, to the AVA Android mobile app
- Protocol
- DDCMP
- Audits
- EVA-DTS format
- Prices
- Price lines of compatible payment systems
DT50 PRO
Urovo DT50 Pro
The route driver’s rugged handheld, offered in partnership with Eutronix. It succeeds the DT50 S: DT50 S units in service keep working with AVA.
- System
- Android 16, upgradable to Android 18
- Processor
- 8 cores, 2.4 GHz
- Services
- Google Mobile Services
- Pack
- Case and screen protector included
NFC
NFC machine tags
To identify the point of sale, operator and vehicle without typing.
- Chip
- NTAG 213
- Machine
- Pack of 50, anti-metal (ferrite), 3M adhesive
- Key fob
- Pack of 10, operator and vehicle IDs
- Use
- Tapping the machine starts the visit
Accessories
Order by email, quoting the references: commandes@darwin-io.fr
Features as found in AVA in November 2026. Some features depend on the hardware or telemetry device used.
See AVA on your machines.
With someone who knows the trade: your machines, your routes, your contracts.
Request a demoOr write to us atcontact@darwin-io.fr
At the Forum de la DA on 18 and 19 November? Come and see us at our stand.

